Performing a Water Heater Flush
Steps To Perform a Water Heater Flush
Proper water heater maintenance can help prevent unnecessary damage and repairs, as well as keep your device functioning properly for years to come. Performing a water heater flush is an essential, yet simple, task. Follow the steps below to perform a successful flush for your home in Sugar Hill, GA.
1. Deactivate the Machine.
If you have a gas model, simply extinguish the pilot light. If you have an electric model, go to the circuit box and deactivate the line supplying the heater.
2. Prepare the Drainage Area and Connect the Garden Hose.
Designate a specific drainage area for your flush. The area you choose should be able to handle a significant amount of warm water flow, without running the risk of flooding your property. Connect one end of your garden hose to the heater's drain valve before running the opposite end into the designated drainage area.
3. Drain Your Tank.
Open your drain valve to let the water out. Allow it to flow for several minutes. During this time, you should head into your kitchen and activate the warm water faucet in your sink. This helps the water drain more smoothly. After a few minutes, turn off the supply valve. The water should gradually begin to slow before stopping altogether. Reopen the valve to run one more quick flush before shutting it off again.
4. Close the Valves and Refill the Tank.
Close your valves and turn your water supply back on. During this time, keep a close eye on the running faucet in your kitchen. You'll know that your heater's tank is full again once the water begins to run smoothly from the faucet.
5. Reactivate the Heating Element.
Refer to step one to reactivate your heater's power. You have now performed a successful water heater flush.
Performing a flush is an excellent way to keep your water heater properly maintained, ensuring that you'll be able to use the device for years to come. For more information or assistance maintaining your device, contact water remediation experts.